3-Axis VMC Machine
feature
- Standard spindle speeds 8000 rpm
- Optional spindle speeds 12000 rpm
- Rigid tapping 3000 rpm
- Spindle nose taper BT40
- 3 axes rapid traverse X, Y, Z: 36 / 36 / 36 m/min
- Fully enclosed heat isolated electric cabinet
- High speed mechanical ATC system T-T: M 2.2 sec
F 3.2 sec
PRODUCTS
introduction
The R-series has a simple structure which is designed to maximize product quality. It yields high output, takes up minimal floor space, is easy to operate and is highly stable.
-b.jpg)
specifications
| Unit | R-600 | ||
|---|---|---|---|
| Table size | mm | 700x 410 | |
| Max. Table load | kg | 250 | |
| Longitudinal table travel (X) | mm | 600 | |
| Cross table travel (Y) | mm | 400 | |
| Vertical head travel (Z) | mm | 400 | |
| Table to spindle nose | mm | 120 ~ 520 | |
| Spindle taper | BT40 | ||
| Pull stud | MAS403 P40T-1(45°) | ||
| Spindle motor | Mitsubishi | kw | 7.5 / 5.5 |
| FANUC | kw | 7.5 / 5.5 | |
| X drive motor | Mitsubishi | kw | 1.5 |
| FANUC | kw | 1.6 | |
| Y drive motor | Mitsubishi | kw | 1.5 |
| FANUC | kw | 1.6 | |
| Z drive motor | Mitsubishi | kw | 3.0 |
| FANUC | kw | 3.0 | |
| Spindle speeds | rpm | 8000 | |
| X, Y, Z axis rapid traverse | m/min | 36 / 36 / 36 | |
| Magazine capacity | no. | 12 | |
| Max. tool weight | kg | 3 | |
| Max. tool length | mm | 250 | |
| ATC time | sec | M2.2 / F3.2 (T-T) | |
| Net weight | mm | 1700 x 2750 x 2750 | |
| Floor space | kg | 3550 | |
- Tool change time supplied with Mitsubishi controller and standard 60Hz power. For electrical requirements other than this standard, please contact one of our personnel.
- The company reserves the right to modify the specifications / design, subject to change without further notice.
Actual specifications, based on order content.
