CNC Tapping Center
feature
- Standard spindle speeds 8,000 rpm
- Optional spindle speeds 12,000 /15000 rpm
- Rigid Tapping 3000 rpm
- Spindle nose taper BT40
- 3 axes rapid traverse X, Y, Z: 48 / 48 / 48 m/min
- Fully enclosed heat isolated electric cabinet
- High Speed Arm-type ATC time T-T: 2.4 sec
- Directly coupled spindle drive system
PRODUCTS
introduction
-b.jpg)
specifications
| Unit | A12040 | ||
|---|---|---|---|
| Table size | mm | 1300 x 530 | |
| Max. Table load | kgf | 400 | |
| X, Y, Z axis travel | mm | 1200 x 500 x 550 | |
| Table to spindle nose | mm | 140 ~ 690 | |
| Spindle taper | BT40 | ||
| Pull stud | MAS403 P40T-1 (45°) | ||
| Spindle motor | Mitsubishi | kw | 7.5 / 5.5 |
| FANUC | kw | 7.5 / 5.5 | |
| Siemens | kw | 7.0 | |
| X drive motor | Mitsubishi | kw | 3.5 |
| FANUC | kw | 3.0 | |
| Siemens | kw | 3.3 | |
| Y drive motor | Mitsubishi | kw | 3.5 |
| FANUC | kw | 3.0 | |
| Siemens | kw | 3.3 | |
| Z drive motor | Mitsubishi | kw | 3.5 |
| FANUC | kw | 4.0 | |
| Siemens | kw | 4.8 | |
| Spindle speeds | rpm | 8000 | |
| X, Y, Z axis rapid traverse | m/min | 48 / 48 / 48 | |
| Magazine capacity | 24+1 | ||
| Max. tool weight | kg | 5 | |
| Max. tool length | mm | 250 | |
| ATC time | sec | 2.4 (T-T) | |
| Net weight | kg | 4700 | |
| Floor space | mm | 2900 x 3270 x 2885 | |
- Tool change time supplied with Mitsubishi controller and standard 60Hz power. For electrical requirements other than this standard, please contact one of our personnel.
- The company reserves the right to modify the specifications / design, subject to change without further notice.
Actual specifications, based on order content.
