Tapping / Machining Center
feature
- Table size 2100*430 mm
- Standard spindle speeds 10000 rpm
- Optional spindle speeds
12000/15000/20000/24000 rpm - Spindle taper BT30
- Tools capacity 20 pcs
- X / Y / Z axis travel 2000 / 400 / 350 mm
- Directly coupled spindle drive system
PRODUCTS
introduction
specifications
| Unit | E20030 | ||
|---|---|---|---|
| Table size | mm | 2100*430 | |
| Max. Table load | kg | 800 | |
| X, Y, Z axis travel | mm | 2000*400*350 | |
| Spindle nose to table | mm | 150~500 | |
| Spindle taper | BT30 | ||
| Pull stud | MAS403 P30T-1(45°) | ||
| Spindle motor | Mitsubishi | kw | 5.5/3.7 |
| FANUC | kw | 5.5/3.7 | |
| Siemens | kw | 4.8 | |
| X drive motor | Mitsubishi | kw | 3.0 |
| FANUC | kw | 3.0 | |
| Siemens | kw | 3.3 | |
| Y drive motor | Mitsubishi | kw | 1.5 |
| FANUC | kw | 1.6 | |
| Siemens | kw | 2.3 | |
| Z drive motor | Mitsubishi | kw | 3.0 |
| FANUC | kw | 3.0 | |
| Siemens | kw | 3.3 | |
| Spindle speeds | rpm | 10000 | |
| X, Y, Z axis rapid traverse | m/min | 36/48/60 | |
| Tools capacity | pcs | 20 | |
| Max. tool weight | kg | 3 | |
| Max. tool length | mm | 200 | |
| ATC time (T-T) | sec. | 2.2 | |
| Tank volume | L | 292 | |
| Net weight | mm | 7800 | |
| Floor space | mm | 4420x2970x2775 | |
- Tool change time supplied with Mitsubishi controller and standard 60Hz power. For electrical requirements other than this standard, please contact one of our personnel.
- The company reserves the right to modify the specifications / design, subject to change without further notice.
Actual specifications, based on order content.
