CNC Tapping Center
feature
- Standard spindle speeds 8000 rpm
- Optional spindle speeds 12,000 /15000 rpm
- Rigid Tapping 3000 rpm
- Spindle nose taper BT40(STD) / BBT30(OPT)
- 3 axes rapid traverse X, Y, Z: 48 / 48 / 48 m/min
- Fully enclosed heat isolated electric cabinet
- High Speed Arm-type ATC time T-T: 2.2 sec
- Directly coupled spindle drive system
PRODUCTS
introduction
-b.jpg)
specifications
| Unit | A6040 | ||
|---|---|---|---|
| Table size | mm | 700 x 410 | |
| Max. Table load | kg | 250 | |
| X, Y, Z axis travel | mm | 600 x 400 x 600 | |
| Table to spindle nose | mm | 150 ~ 750 | |
| Spindle taper | BT40 | ||
| Pull stud | MAS403 P40T-1 (45°) | ||
| Spindle motor | Mitsubishi | kw | 7.5 / 5.5 |
| FANUC | kw | 7.5 / 5.5 | |
| Siemens | kw | 7.0 | |
| X drive motor | Mitsubishi | kw | 1.5 |
| FANUC | kw | 1.6 | |
| Siemens | kw | 2.3 | |
| Y drive motor | Mitsubishi | kw | 1.5 |
| FANUC | kw | 1.6 | |
| Siemens | kw | 2.3 | |
| Z drive motor | Mitsubishi | kw | 3 |
| FANUC | kw | 3 | |
| Siemens | kw | 3.3 | |
| Spindle speeds | rpm | 8000 | |
| X, Y, Z axis rapid traverse | m/min | 48 / 48 / 48 | |
| Tools capacity | tools | 24+1 | |
| Max. tool weight | kg | 5 | |
| Max. tool length | mm | 250 | |
| ATC time | sec | 2.2 (T-T) | |
| Net weight | kg | 3700 | |
| Floor space | mm | 1800 x 2750 x 2785 | |
- Tool change time supplied with Mitsubishi controller and standard 60Hz power. For electrical requirements other than this standard, please contact one of our personnel.
- The company reserves the right to modify the specifications / design, subject to change without further notice.
Actual specifications, based on order content.
