CNC Tapping / Machining Center
Twin pallet / dual pallet / Full-travel column
feature
- Standard spindle speeds 8,000 rpm
- Optional spindle speeds 12,000 /15000 rpm
- Rigid tapping: 3000rpm
- Spindle nose taper: BT40
- 3 axes rapid traverse X, Y, Z: 36 / 36 / 48 m/min
- High speed arm type ATC time T-T: 3.1sec
- APC time : 5 sec
- Direct coupled spindle drive system
PRODUCTS
introduction
Dual work stations, rotary worktables, and moving column structure allows operator to effectively reduce idle time needed to change workpieces during machining. Well suited for mass production.
-b.jpg)
specifications
| Unit | S6040 | ||
|---|---|---|---|
| Table size | mm | 700 x 400 x 2 pcs | |
| Max. Table load | kg | 250 | |
| X, Y, Z axis travel | mm | 600 x 400 x 500 | |
| Table to spindle nose | mm | 180 ~ 680 | |
| Spindle taper | BT40 | ||
| Pull stud | MAS403 P40T-1 (45°) | ||
| Spindle motor | Mitsubishi | kw | 7.5 / 5.5 |
| FANUC | kw | 7.5 / 5.5 | |
| Siemens | kw | 7.0 | |
| X drive motor | Mitsubishi | kw | 3.5 |
| FANUC | kw | 3 | |
| Siemens | kw | 3.3 | |
| Y drive motor | Mitsubishi | kw | 3.5 |
| FANUC | kw | 3 | |
| Siemens | kw | 3.3 | |
| Z drive motor | Mitsubishi | kw | 3.5 |
| FANUC | kw | 4 | |
| Siemens | kw | 4.9 | |
| Spindle speeds | rpm | 8,000 | |
| X, Y, Z axis rapid traverse | m/min | 36 / 36 / 48 | |
| Tools capacity | tools | 24+1 | |
| Max. tool weight | kg | 5 | |
| Max. tool length | mm | 250 | |
| ATC time (T-T) | sec | 3.1 | |
| APC time | sec | 5 | |
| Net weight | kg | 6,600 | |
| Floor space | mm | 3660 x 2582 x 2780 | |
- Tool change time supplied with Mitsubishi controller and standard 60Hz power. For electrical requirements other than this standard, please contact one of our personnel.
- The company reserves the right to modify the specifications / design, subject to change without further notice.
Actual specifications, based on order content.
