3 Axis CNC Machining Center
feature
- Standard spindle speeds 10,000 rpm
- Optional spindle speeds 12,000 / 15,000 / 20,000 rpm / 24,000 rpm / 30,000 rpm (Built in Spindle)
- Rigid tapping 4000rpm
- Spindle nose taper BT30(STD)/BBT30(OP)
- 3 axes rapid traverse X, Y, Z: 48 / 48 / 60 m/min
- Fully enclosed heat isolated electric cabinet
- High Speed mechanical ATC system T-T: M 1.6 sec
F 2.5 sec
- Directly coupled spindle drive system
PRODUCTS
introduction
The R-series has a simple structure which is designed to maximize product quality, It yields high output, is easy to operate and is highly stable.
-b.jpg)
specifications
| Unit | R5030 | ||
|---|---|---|---|
| Table size | mm | 550 x 320 | |
| Max. Table load | kgf | 200 | |
| X, Y, Z axis travel | mm | 500 x 300 x 300 | |
| Table to spindle nose | mm | 170 ~ 470 | |
| Spindle taper | BT30 | ||
| Pull stud | MAS403 P30T-1 (45°) | ||
| Spindle motor | Mitsubishi | kw | 5.5 / 3.7 |
| FANUC | kw | 3.7 / 2.2 | |
| Siemens | kw | 4.8 | |
| X drive motor | Mitsubishi | kw | 1 |
| FANUC | kw | 1.6 | |
| Siemens | kw | 2.3 | |
| Y drive motor | Mitsubishi | kw | 1 |
| FANUC | kw | 1.6 | |
| Siemens | kw | 2.3 | |
| Z drive motor | Mitsubishi | kw | 2 |
| FANUC | kw | 3 | |
| Siemens | kw | 3.3 | |
| Spindle speeds | rpm | 10000 | |
| X, Y, Z axis rapid traverse | m/min | 48 / 48 / 60 | |
| Tools capacity | tools | 14 / 20 (OP) | |
| Max. tool weight | kg | 3 | |
| Max. tool length | mm | 200 | |
| ATC time | sec | M1.6 / F2.5 (T-T) | |
| Net weight | kg | 2200 | |
| Floor space | mm | 1500 x 2230 x 2480 | |
- Tool change time supplied with Mitsubishi controller and standard 60Hz power. For electrical requirements other than this standard, please contact one of our personnel.
- The company reserves the right to modify the specifications / design, subject to change without further notice.
Actual specifications, based on order content.
